Apex Cervical Orthosis - New Adjustable Height

Many activities in modern daily living place the head in a detrimental forward head posture. The Apex Cervical orthosis is an inexpensive and convenient tool to assist the healthcare professional in restoring a patient’s proper cervical posture. The Apex counters the negative forces caused by forward posture, and works to gently reverse kyphotic attitude when used daily under the supervision of a spinal professional.

Adjustable to 3 heights
Assists restoration of proper cervical posture
Helps decrease pressure on cervical soft tissue
Counteracts forward head posture
Helps in recovery from acceleration/deceleration injuries

Product Dimensions: 8” x 4” x 4.5”

Instructions for Use

this product must be used under the supervision of your health care professional. To prevent hyperextension, fit the device to the patient by removing one or both lower portions of the device. To remove, slide a sharp blade along the inside edge of the precut areas.

Place patient in supine position on a firm surface. Locate the Apex in the area of lordotic loss. The larger angled surface should face the patient’s shoulders. To adjust to the height, carefully remove sections by completing cut along the scored lines. The Apex should be used daily, with increasing time intervals. The Apex should be used for an initial treatment of 2 minutes. Increase each daily treatment in 1 minute intervals, with a maximum treatment time of 20 minutes.

Train patient to roll off of the Apex before sitting up post treatment. Some soreness or stiffness is normal, and our cold therapy CorPak should be applied to the affected area for 15 minutes after each treatment. (CorPak sold separately)